Penerapan Lean Manufacturing untuk Meminimasi Proses Dandori Mesin Molding Pada  PT XYZ dengan Metode SMED

Raihan Rahmadianto; Mega Cattleya PA Islami

doi:10.59581/jkts-widyakarya.v2i1.2234

Authors

Raihan Rahmadianto Universitas Pembangunan Nasional Veteran Jawa Timur
Mega Cattleya PA Islami Universitas Pembangunan Nasional Veteran Jawa Timur

DOI:

https://doi.org/10.59581/jkts-widyakarya.v2i1.2234

Keywords:

Single Minute Exchange of Dies (SMED),, Lean Manufacturing, Dandori, Manufacturing

Abstract

PT XYZ is a manufacturing company that produces various products, such as molds and several spare parts. The production process often experiences wasted time at the machine setup stage, known as dandori. To avoid production delays, companies need to increase their productivity. This research aims to propose the application of Lean Manufacturing methods, especially SMED, to reduce machine uptime by focusing on optimizing external activities in mold making. Through the application of the Single Minute Exchange of Dies (SMED) concept, fourteen internal activities were changed to eight internal activities, resulting in improvements with a reduction in machine setup time from 44 minutes to 22 minutes, or a reduction of 50%. The hope is that these results will increase the company's output significantly.

References

Anaam, I. K., Hidayat, T., Yuga Pranata, R., Abdillah, H., & Yhuto Wibisono Putra, A. (2022). Pengaruh trend otomasi dalam dunia manufaktur dan industri. Vocational Education National Seminar, 1(1), 46–50.

Azwina, R., Wardani, P., Sitanggang, F., & Silalahi, P. R. (2023). Strategi Industri Manufaktur Dalam Meningkatkan Percepatan Pertumbuhan Ekonomi Di Indonesia. Profit: Jurnal Manajemen, Bisnis Dan Akuntansi, 2(1), 44–55. https://journal.unimar-amni.ac.id/index.php/profit/article/view/442

Chandra Setiawan, L. (2023). Mereduksi Waktu Set Up Menggunakan Metode SMED Pada Mesin ISS Kemas PT PHAPROS TBK Semarang. Industrial Engineering Online Journal, 12(1).

Eko Putra, F., & Fitra, A. (2022). Penurunan Change Over Time Automatic Machine Fillingdi PT XYZ Menggunakan Metode Single Minute Exchange of Dies(SMED). Jurnal Teknik Industri, 3(02), 72–82.

Irgan, M., & Mahfidz, C. (2023). Pengurangan Waktu Setup Proses Pemotongan Pvc Foam Pada Mesin Cross Cut Menggunakan Metode Single Minute Exchange of Dies ( Smed ).

Jababeka. (2023). Impact of Cripple Part Storage Management System Improvement on the Overall Equipment Effectiveness in an Automotive Spare Part Manufacturing Company. 8(2), 89–106.

Maharani, D. A., & Musfiroh, I. (2021). Review: Penerapan Metode Single-Minute Exchange of Dies Sebagai Upaya Peningkatan Produktivitas Kerja Di Industri Farmasi. Majalah Farmasetika, 6(3), 287. https://doi.org/10.24198/mfarmasetika.v6i3.34884

Nelson, A., Chanada, E., Riady, F., Salim, K., & Nicholas, V. (2023). Strategic Resourcing yang Efektif dan Efisien dalam Industri Manufaktur. Jurnal Mirai Management, 8(2), 16–23.

Purnomo, E., Rachma Dwicahyani, A., & Lillahulhaq, Z. (2021). Analisa dan Perbaikan Waktu Set-up Pergantian Cetakan dengan Metode Single-Minute Exchange of Dies (SMED) (Studi Kasus: PT. XYZ). Senastitan 1, 26–34.

Ramadhan, G., & Sudarmawan, G. (2022). Peningkatan Produktivitas pada Penurunan Waktu Set- Up Mesin AIDA 200 Ton dengan Menggunakan Metode SMED. 1580–1589.

Silva, D., & Setiafindari, W. (2021). Analisis Penurunan Waktu Setup Dengan Menggunakan Single Minute Exchange of Die Untuk Meningkatkan Produktivitas Pada Automatic Moulding. 1(3), 1–19.

Sudarmaji, H. (2022). Implementasi Metode Single Minute Exchange Of Dies (SMED) pada Mesin FSF Honing Channel 8 di PT SKFI. Technologic, 13(1). https://doi.org/10.52453/t.v13i1.388

Suhendra, Tri Ngudi Wiyatno, Andini Putri Riandani, Adi Fitra, Siti Rahayu, Nida An Khofiyah, & Supriyati. (2023). Pengenalan Konsep Dasar Lean Manufacturing Pada Perusahaan Sme (Small Medium Enterprise). Jurnal Pengabdian Kolaborasi Dan Inovasi IPTEKS, 1(5), 575–581. https://doi.org/10.59407/jpki2.v1i5.115

Wibowo, P. A., & Pramudika, B. P. (2023). Implementasi Single Minute Exchange of Dies ( SMED ) Saat Pergantian Mold Pada Proses Produksi di PT . IMC Tekno Indonesia. 6(4), 1085–1093.