Pengaruh Bahan Tambah Serat Ijuk Terhadap Sifat Mekanik Beton SCC (Self Compacting Concrete)

Rizal Rizaldi; Dendi Yogaswara

doi:10.59581/jkts-widyakarya.v1i4.1190

Authors

Rizal Rizaldi Institut Teknologi Garut
Dendi Yogaswara Institut Teknologi Garut

DOI:

https://doi.org/10.59581/jkts-widyakarya.v1i4.1190

Keywords:

SCC Concrete, Ijuk Fiber, Concrete compressive strength, The tensile strength of concrete

Abstract

In the current development of concrete innovation technology, there are also expensive materials that are cheap as concrete additives for the efficiency of the cost of making concrete. cheap and can be used as concrete innovation. The purpose of adding palm fiber fiber is to improve the quality of concrete, both compressive strength and split tensile strength. The method used in this study was experimentation by adding palm fiber to the SCC concrete mixture with variations of 2%, 4% and 6%. As for the addition of chemical substances, the superplasticizer admixture aims to make it easier for SCC concrete to achieve a slump flow value that meets the requirements. After testing, the highest compressive strength test specimen is BC 1 2% palm fiber worth 19.38 MPa and for the lowest compressive strength test is BC 2 6% palm fiber worth 5.46 MPa. And for the split tensile strength test the highest is BC 4 2% palm fiber worth 9.47 MPa and for the lowest split tensile strength test is BC 3 6% palm fiber worth 5.82 MPa.

References

M. Wora, “Studi Penggunaan Serat Ijuk Sebagai Bahan Tambahan Dalam Campuran Beton Mutu Normal,” Teknosiar, vol. 7, no. 1, pp. 18–27, 2013.

I. G. M. Sudika, N. K. Astariani, and I. N. Suardana, “Pengaruh dan Perbandingan Serat Ijuk Lokal Bali dengan Serta Ijuk Lombok Pada Campuran Beton Normal terhadap Kuat Tekan dan Tarik Belah Beton,” J. Tek. Gradien, vol. 9, no. 1, pp. 199–214, 2017, [Online]. Available: https://ojs.unr.ac.id/index.php/teknikgradien/article/view/138

A. Tamrin, H. Ashad, and R. Musa, “Konstribusi Serat Ijuk Terhadap Sifat Mekanik Beton Sistem Self Compacting Concrete (SCC),” J. Tek. Sipil MACCA, vol. 6, no. 3, pp. 186–192, 2021, doi: 10.33096/jtsm.v6i3.345.

R. A. Sidabutar, J. O. Simanjuntak, and J. M. Simangunsong, “Pengaruh Penambahan Serat Ijuk Terhadap Kuat Tekan Beton,” J. Visi Eksakta, vol. 3, no. 1, pp. 51–58, 2022, doi: 10.51622/eksakta.v3i1.570.

N. Rochmah, “Pengaruh Serat Ijuk Sebagai Bahan Tambah Terhadap Kuat Tarik Belah Beton,” J. Penelit. LPPM Untag Surabaya, vol. 02, no. 01, pp. 52–56, 2017.

M. A. Sultan, E. Tuhuteru, and M. F. F. Abdullah, “Kapasitas Lentur Balok Beton Ringan Dengan Penambahan Serat Ijuk,” Kapasitas Lentur Balok Bet. Ringan Dengan Penambahan Serat Ijuk, vol. 7, no. 2, pp. 163–171, 2021.

E. Septiandini and D. Sulaiman, “Studi Pemanfaatan Serat Ijuk Sebagai Bahan Tambah Terhadap Mutu Bata Beton Karawang (Roster),” Menara J. Tek. Sipil, vol. 1, no. 1, p. 7, 2006, doi: 10.21009/jmenara.v1i1.7854.

T. Sipil and U. Batam, “KOMPOSIT BETON,” vol. 09, no. 3, pp. 156–163, 2020.

“Ketua Penyunting : Penyunting : Penyunting Pelaksana : Redaksi : Jurusan Teknik Sipil ( A4 ) FT UNESA Ketintang - Surabaya Email : REKATS”.

L. Akustik and U. S. Kuala, “Pengaruh Serat Ijuk Pada Panel Dinding Beton,” vol. 1, no. 2008, pp. 13–20, 2015.

S. Pratiwi, H. Prayuda, and F. Prayuda, “Kuat Tekan Beton Serat Menggunakan Variasi Fibre Optic dan Pecahan Kaca (Compressive Strength of Fibre Concrete Using Fibre Optic Variation and Glass Fracture),” Semesta Tek., vol. 19, no. 1, pp. 55–67, 2016.

A. Widodo and M. A. Basith, “Analisis Kuat Tekan Beton Dengan Penambahan Serat Rooving Pada Beton Non Pasir,” J. Tek. Sipil dan Perenc., vol. 19, no. 2, pp. 115–120, 2017, doi: 10.15294/jtsp.v19i2.12138.